| 因为燃气燃烧器主要燃料 |
| 添加时间：2019/11/9 13:53:52 浏览次数： |
| 因为燃气燃烧器主要燃料分天然气、液化石油气、城市煤气及其他可燃气体，这几种燃料属易燃、易爆的危险气体，在使用和储藏过程中都应对安全引起高度重视，否则将发生重大安全方面的事故。 Because the main fuels of gas burners are natural gas, liquefied petroleum gas, city gas and other combustible gases, which are flammable and explosive dangerous gases, great attention should be paid to safety in the use and storage process, otherwise major safety problems will occur. (一)、开机操作: (I) startup operation: 1.对新安装炉体，调试前应认真检测燃气是否符合燃烧器的要求;检查供气管路上的检测仪器是否正常及管道阀门开、关是否正常，是否便于以后使用及检修。 1. For the newly installed furnace body, before commissioning, it is necessary to carefully check whether the gas meets the requirements of the burner; check whether the detection instrument on the air supply pipeline is normal, whether the opening and closing of the pipeline valve are normal, and whether it is convenient for future use and maintenance. 2.对新安装的管道，应认真检查所有管路的安装可靠性和管路的密封性。 2. For newly installed pipes, carefully check the installation reliability and tightness of all pipes. 3.使用单独气化站的用户，要保证供气量、供气参数符合安全燃烧要求。 3. Users using a separate gasification station shall ensure that the air supply volume and parameters meet the requirements of safe combustion. 4.操作人员认真阅读设备使用说明书，熟练掌握安全操作知识及方法。 4. The operator shall carefully read the equipment operation manual and master the safety operation knowledge and methods. 5.每次开机前要检查燃气阀门是否打开，否则燃烧器不工作。 5. Check whether the gas valve is open before starting each time, otherwise the burner will not work. 6.启动控制柜上的电源控制按扭，此时数显表就显示当前炉内温度，新安的装炉体此温度为环境温度。 6. Start the power control button on the control cabinet, at this time, the digital display meter will display the current furnace temperature, which is the ambient temperature of the newly installed furnace body. 7.启动风机控制按扭，安装在炉体上的风机就工作，此时若风机损坏控制柜就自动保护不进入下一步操作。 7. Start the fan control button, and the fan installed on the furnace body will work. At this time, if the fan is damaged, the control cabinet will automatically protect it from further operation. 8.助燃风机工作无异常现象时，再启动燃烧控制按扭，此时燃烧程序控制器就开始工作，它通过一定的程序进行点火、送气、检测火焰、等程序最终实现安全燃烧。 8. When the combustion supporting fan works without any abnormal phenomenon, start the combustion control button again, and then the combustion program controller starts to work. It carries out ignition, air supply, flame detection, and other programs through certain programs to finally realize safe combustion. |
| 上一页 燃烧机主要应用燃料种类 |
| 下一页 燃烧器是一种将燃料和空气 |